Branch Opening Times  |  Liverpool 0151 546 7378  |  Cheshire 01606 620 440  |  Southern Branch 0120 658 0367

Store Opening Times

 |  Call Your Branch
Trustpilot Star

Rated 4.6 on Google

Free, Fast & Safe Delivery

Totally Free Installation

We'll Remove Your Old Shed

Free Click & Collect

Delivery & Installation


North West

Atlas Sheds offer FREE Delivery & Fitting* across Merseyside, Lancashire, Greater Manchester and Cheshire.

Delivery is free in the North West to the following Post Code prefixes: BB, BL, CH, CW, L, LA 1-4, M, OL, PR, SK, WA, WN

For our current delivery lead time please visit any product page and click 'Delivery Information'

If you require a product quicker products can normally be collected from our Knowsley depot within 14 days from order if the customer gives us notice once order is placed. 

South East

Atlas Sheds offer FREE Delivery & Fitting* across Colchester, Chelmsford, Braintree, Basildon, Ipswich, Cambridge, Milton Keynes, North & East London.

Free Delivery to the following Postcodes: CO, CM, CB, IP, SS

*Delivery & Installation is available in the following areas for the following fees - 

*£150 surcharge these none local postcodes: N, E, NW, SE, SW, W, NR, DA, BR, MK,PE, EN, AL 

*£200 surcharge to these none local postcodes: HA, EC, WC, UB, CR, BR, TW, KT, SM, WD

For our current delivery lead time please visit any product page and click 'Delivery Information'

If you require a product quicker products can normally be collected from our Essex depot within 14 days from order if the customer gives us notice once order is placed. 

    Pro Installation

    All timber sheds, Summerhouses and playhouses are installed FREE* providing the customer has a solid level base (see Foundation Prep below) Please note: A delivery charge may apply depending on your address (see above) Please Note: Old Shed Removal Service is not available in the Charged delivery areas.

    Foundation Prep

    We offer a number of solutions for foundation preparation.

    Combi Base - It is essential to have a solid level area for your shed to be installed on. Our Combi Base is comprised of solid, plastic, eco tile contact points with a level tanalised timber frame, providing an ideal foundation for the installation of your shed. The Combi Base also allows for exellent drainage and so is also recomended for areas that may be solid but are prone to gather water. Please note: if you order a Combi Base you do not need to add underfloor bearers to your order.

    Bearers - In addition to a solid level base underfloor bearers protect your shed from damp and rot by raising the shed floor off the ground to prevent it sitting in any water. 

    Shed Removal

    Did you know that Atlas Sheds can dismantle and remove your old timber shed? Our super time-saving and often overlooked service means there’s non of the hassle of taking your old shed to the local tip and messing up your car! Important: Your old shed must be empty and any electrics or plumbing disconnected. The service is offered to remove the shed only, not household rubbish or contents of the old shed. You can add this option as you order your shed. Please note we can only take away full shed panels. 

    Delivery & Installation Terms & Conditions

    It is the customers responsibility to ensure there is adequate access for the product ordered to be delivered. Please call us for any information about product dimensions.

    Please note: Our sheds are delivered in full panels not individual planks therefore if the access to the installation area is through a house or there is limited access or obstruction please contact us before ordering so we can adjust manufacturing to suit. A manufacturing charge of £50 will apply if panels are required to be custom made in smaller sections.

    There is a charge of £100 for any revisit that is due to inadequate access that has not been conveyed to our office before delivery. 

    Your base must be solid and level in order for us to install your shed to the proper standard. 

    Our installers will check the level of your base on the day of delivery.

    If your base is not solid or level there is the following 3 options

    1. We can install a subframe / combi base to properly prepare the area. There is a charge for this service, please see any product page for costings.
    2. We can leave the product stacked at the premises and revisit to install once the base has been corrected. There is a charge of £100 for any revisit that is due to an inadequate base.
    3. We can install the product on the area provided if possible (subject to installers judgement). However this will void the warranty for the areas effected.